Measure first, travel easier — fit and setup details before you buy
Pawcursion
Fit View cart 0
A beagle sitting inside a gray quilted dog car bed installed on a vehicle rear seat.
Diagram of the beagle in the gray car bed with callouts for the enclosing sides, cushion and tall back panel.
Component diagram of the gray car bed with close-ups of its quilted surface, pocket, clip, zipper and removable cushion.
Attachment diagram showing the gray car bed on a rear seat with close-ups of the seat strap and two clips.
Three-step cleaning diagram showing the cushion insert removed before the gray fabric cover is placed in a washer.
Travel collage with a dog at a car window and two smaller views of a beagle in the gray rear-seat bed.
Specifications diagram of the gray dog car bed showing its dimensions, model, weight and supplier-listed 55-pound maximum.
A beagle sitting in the gray quilted dog bed on a floor in front of a window.
Angled product view of the gray car bed with its adjustable seat strap and raised quilted sides.
Front product view of the gray dog car bed showing its tall back, low entry and quilted cushion.
Three-quarter view of the gray dog car bed showing the low entry, tall back and side storage pocket.
Opposite angled view of the gray car bed showing its removable cushion and quilted side walls.

Product overviewSilent · Pause or seek at any time

A silent product overview moves through exact supplier photographs of the RoadNest car bed, including the bolstered shape, cushion, attachment straps and rear-seat placement.

Travel comfort / rear-seat bed

VEVOR RoadNest Dog Car Bed

$64.95

Measure before choosing

Compare the pet at rest and the rear-seat position with the 28.35 × 20.47-inch exterior footprint; internal sleeping dimensions are not supplied.

View full measurements
Decision snapshot
External footprint
28.35 x 20.47 in
Supplier-listed pet size
Up to 55 lb
Fit check
Resting length and rear-seat space

Review before checkoutYour cart opens next so you can confirm the item, configuration and quantity.

RoadNest is a padded rear-seat car bed with raised sides, an adjustable attachment belt, removable cushion and storage pocket. Only exterior dimensions are supplied; the 55-lb label does not confirm sleeping fit.

SKU: D0102HSVIIJ Category:

WHAT TO KNOW

A defined rear-seat rest spot

  • 01A padded place on the rear seat

    Raised sides, a removable cushion and attachment straps define the resting area.

  • 02Only the outside size is listed

    The 28.35 × 20.47-inch exterior footprint and 55-lb limit do not guarantee interior fit.

  • 03A bed is not crash protection

    Use the attachment system and any separate travel restraint as directed.

Overview

RoadNest attaches around a rear headrest and provides a padded resting area on the rear seat. The supplier gives a 28.35 × 20.47-inch exterior footprint and a 55-lb maximum but no internal sleeping dimensions. Compare your dog’s resting length with the available seat space, and use a separate appropriate vehicle restraint because the bed and clip-on tether are not a crash-tested restraint system.

Where it fits

  • The padded bed attaches around a rear headrest.
  • A removable cushion and side pocket are included.
  • The clip-on tether is a convenience feature, not a crash-tested vehicle restraint.

Measure before choosing

Compare the listed dimensions with your pet, vehicle and available storage space.

  1. Measure the pet’s curled and relaxed resting length.
  2. Measure the available rear-seat area.
  3. Compare both with the 28.35 × 20.47-inch exterior footprint; the supplier does not provide internal sleeping dimensions.
  4. Check that the shown strap route suits the rear-row headrest layout.

Use the dog road-trip checklist

Product specifications

Model
JBS-PCS-001-GRAY
External size
28.35 × 20.47 × 11.81 in
Backrest height
21.26 in
Product weight
4.76 lb
Supplier-listed pet size
Up to 55 lb
Internal sleeping area
Not supplied; exterior dimensions and the 55-lb label do not confirm fit
Construction
Ultrasonic-quilted crystal velvet, sponge filling and a removable cushion with a waterproof bottom layer

What's included

  • One gray car bed
  • Removable cushion/pad
  • Adjustable rear-seat attachment belt
  • One fixed clip-on pet tether

Care and storage

  • Unzip the fabric cover and remove the sponge and seat-cushion filling.
  • Machine-wash only the removed cover, following its sewn care label.
  • Inspect the attachment belt and pet tether before each trip.

Frequently asked questions

Is this a crash-tested restraint?

No. It is a padded car bed with an included clip-on tether, not a crash-tested restraint system.

How do I check whether my dog will fit?

Only exterior dimensions are available. Compare the 28.35 × 20.47-inch footprint with your dog’s resting length and the rear seat; the 55-lb label does not guarantee sleeping fit.

Where does it install?

The bed is intended for the rear row. Follow the shown strap route and keep the vehicle restraint system separate.

Can it be used outside the car?

Its padded shape can provide a resting place at a supervised stop; keep it clean, dry and away from traffic.

RELATED GEAR

You may also need

A few useful additions for the rest of the setup.

Travel comfort / portable mat

ChillFold Travel Cooling Mat

$39.95
System
Water-fill gel mat
Setup
Fill, seal and distribute

A water-fill cooling mat for supervised warm-weather rest at home, in an open crate or at a campsite.

Review fit & details

Rear-seat space / segmented platform

TrailShield 600D Hard-Bottom Back-Seat Cover

$49.95
Open size shown
80.9 x 64.56 in
Folded size shown
27.55 x 18.5 x 2.75 in

An 80.9 × 64.56-inch rear-seat cover with segmented support panels, mesh, pockets and side flaps.

Review fit & details

Trip notes

Measure once. Travel with confidence.

Get practical fit guides, road-trip checklists, and occasional product updates.

Occasional fit guides and product updates. Unsubscribe whenever you like.